Description
SPECIFICATION OF “JBN” BRAND “P SERIES” AMPLIFIERS
SIZE : 3U |
|||
|
MODEL |
P-7001 |
P-8001 |
P-9001 |
| Output 2Ohms 1KHz0.1% THD stereo: | 2 x 2000W | 2 x 2400W | 2X2630W |
| Output 4Ohms 1KHz0.1% THD stereo: | 2 x 1400W | 2 x 1700W | 2X2000W |
| Output 8Ohms 1KHz0.1% THD stereo: | 2 x 1000W | 2 x 1200W | 2X1400W |
| Output 8Ohms 1KHz0.1% THD bridge: | 2800W | 3400W | 3800W |
| Output 4Ohms 1KHz0.1% THD bridge : | 3400W | 4200W | 4600W |
| Signal / noise: | 105dB | 106dB | 106dB |
| Slew Rate: | 70v/μs | 75v/μs | 75v/μs |
| Damping factor: | 500:1 | 550:1 | 550:1 |
| Fuse: | T25A | T32A | T32A |
| Main Power Supply: | 220V 50/60Hz | ||
| Power Consumption | 2660W | 2800W | 3400W |
| Input Sensitivity: | 0.775V(0dB) | ||
| Freq. Response @1 Watt into 8 Ohm: | ±0.05dB, 20Hz -20kHz | ||
| THD: | ≤0.01% Rated Power@ 8Ω1kHz | ||
| IMD: | ≤0.1% Rated Power@ 8Ω | ||
| Input Impedance: | 15KΩ/30KΩ hours, unbalance or balance | ||
| Crosstalk: | ≤-70dB | ||
| Input CMRR: | ≤-75dB | ||
| Indicators: | Signal, Protect, Clip, Limited | ||
| Connector: | Input to carry:3 pins Male XLR, Female XLR Output to carry: Neutrik Speak on and Bonding Post |
||
| Net Weight: | 36.25kgs | 38kgs | 40Kgs |
| Dimensions:(mm) | 483W x 418D x 133H | ||
Characteristic of JBN P Series:
(1). Toshiba transistor
(2). Soft start.
(3). DC protect.
(4). Overheat protect when the temperature of amplifier over 95℃
(5). Overload protect.
(6). Short circuit protect.
(7). Limiter function.
(8). Crossover inside to cut off the low frequency to protect your speaker.
(9). Bridge and parallel mode for choosing.
(10). Sensitivity input selection.
(11). Output impedance selection (4 ohm & 8 ohm)
(12). Ground selection.
(13). Very effective cooling system. The speed of the fan is adjustable according
Description
SPECIFICATION OF “JBN” BRAND “P SERIES” AMPLIFIERS
SIZE : 3U |
|||
|
MODEL |
P-7001 |
P-8001 |
P-9001 |
| Output 2Ohms 1KHz0.1% THD stereo: | 2 x 2000W | 2 x 2400W | 2X2630W |
| Output 4Ohms 1KHz0.1% THD stereo: | 2 x 1400W | 2 x 1700W | 2X2000W |
| Output 8Ohms 1KHz0.1% THD stereo: | 2 x 1000W | 2 x 1200W | 2X1400W |
| Output 8Ohms 1KHz0.1% THD bridge: | 2800W | 3400W | 3800W |
| Output 4Ohms 1KHz0.1% THD bridge : | 3400W | 4200W | 4600W |
| Signal / noise: | 105dB | 106dB | 106dB |
| Slew Rate: | 70v/μs | 75v/μs | 75v/μs |
| Damping factor: | 500:1 | 550:1 | 550:1 |
| Fuse: | T25A | T32A | T32A |
| Main Power Supply: | 220V 50/60Hz | ||
| Power Consumption | 2660W | 2800W | 3400W |
| Input Sensitivity: | 0.775V(0dB) | ||
| Freq. Response @1 Watt into 8 Ohm: | ±0.05dB, 20Hz -20kHz | ||
| THD: | ≤0.01% Rated Power@ 8Ω1kHz | ||
| IMD: | ≤0.1% Rated Power@ 8Ω | ||
| Input Impedance: | 15KΩ/30KΩ hours, unbalance or balance | ||
| Crosstalk: | ≤-70dB | ||
| Input CMRR: | ≤-75dB | ||
| Indicators: | Signal, Protect, Clip, Limited | ||
| Connector: | Input to carry:3 pins Male XLR, Female XLR Output to carry: Neutrik Speak on and Bonding Post |
||
| Net Weight: | 36.25kgs | 38kgs | 40Kgs |
| Dimensions:(mm) | 483W x 418D x 133H | ||
Characteristic of JBN P Series:
(1). Toshiba transistor
(2). Soft start.
(3). DC protect.
(4). Overheat protect when the temperature of amplifier over 95℃
(5). Overload protect.
(6). Short circuit protect.
(7). Limiter function.
(8). Crossover inside to cut off the low frequency to protect your speaker.
(9). Bridge and parallel mode for choosing.
(10). Sensitivity input selection.
(11). Output impedance selection (4 ohm & 8 ohm)
(12). Ground selection.
(13). Very effective cooling system. The speed of the fan is adjustable according
