Description
SPECIFICATION OF KARAK BRAND, KSA SERIES AMPLIFIERS. (MADE IN KOREA)
| MODEL | KSA-800 | KSA-1200 | KSA-1600 |
| Rated Power Output (2Ω) | 2 x 770W | 2 x 1184W | 2 x 1585W |
| Rated Power Output (4Ω) | 2 x 610W | 2 x 1092W | 2 x 1340W |
| Rated Power Output (8Ω) | 2 x 580W | 2 x 950W | 2 x 1200W |
| Bridged Output (4Ω) | 1250W | 2085W | 2680W |
| Bridged Output (8Ω) | 1550W | 2385W | 3180W |
| S/N Ratio | More than 100dB | ||
| Separation | >70dB | ||
| Wave Distortion | <0.06% (1KHz) | ||
| Sensitivity(Input) | -4dB, 0dB, +4dB | ||
| Damping Factor (8Ω) | >400 | ||
| Slew Rate | ≥30V/μs | ||
| Input Terminal | 1/4 TRS Phone Connector, XLR Connector | ||
| Frequency Response | 20Hz ~ 20kHz (-3dB, 4Ω/50% Power) | ||
| Power Supply | AC220V / 60Hz | ||
| Dimensions | 483(W) x 88(H) x 390(D)mm | ||
| Net Weight (kg) | 19 | 23 | 26 |
| Characteristic of LA Series: | |||
| (1). Toshiba transistor (2). Soft start. (3). DC protect. (4). Overheat protect when the temperature of amplifier over 95℃ (5). Overload protect. (6). Short circuit protect. (7). Limiter function. (8). Crossover inside to cut off the low frequency to protect your speaker. (9). Bridge and parallel mode for choosing. (10). Sensitivity input selection. (11). Output impedance selection (4 ohm & 8 ohm) (12). Ground selection. (13). Very effective cooling system. The speed of the fan is adjustable according |
|||
Description
SPECIFICATION OF KARAK BRAND, KSA SERIES AMPLIFIERS. (MADE IN KOREA)
| MODEL | KSA-800 | KSA-1200 | KSA-1600 |
| Rated Power Output (2Ω) | 2 x 770W | 2 x 1184W | 2 x 1585W |
| Rated Power Output (4Ω) | 2 x 610W | 2 x 1092W | 2 x 1340W |
| Rated Power Output (8Ω) | 2 x 580W | 2 x 950W | 2 x 1200W |
| Bridged Output (4Ω) | 1250W | 2085W | 2680W |
| Bridged Output (8Ω) | 1550W | 2385W | 3180W |
| S/N Ratio | More than 100dB | ||
| Separation | >70dB | ||
| Wave Distortion | <0.06% (1KHz) | ||
| Sensitivity(Input) | -4dB, 0dB, +4dB | ||
| Damping Factor (8Ω) | >400 | ||
| Slew Rate | ≥30V/μs | ||
| Input Terminal | 1/4 TRS Phone Connector, XLR Connector | ||
| Frequency Response | 20Hz ~ 20kHz (-3dB, 4Ω/50% Power) | ||
| Power Supply | AC220V / 60Hz | ||
| Dimensions | 483(W) x 88(H) x 390(D)mm | ||
| Net Weight (kg) | 19 | 23 | 26 |
| Characteristic of LA Series: | |||
| (1). Toshiba transistor (2). Soft start. (3). DC protect. (4). Overheat protect when the temperature of amplifier over 95℃ (5). Overload protect. (6). Short circuit protect. (7). Limiter function. (8). Crossover inside to cut off the low frequency to protect your speaker. (9). Bridge and parallel mode for choosing. (10). Sensitivity input selection. (11). Output impedance selection (4 ohm & 8 ohm) (12). Ground selection. (13). Very effective cooling system. The speed of the fan is adjustable according |
|||
